Toshiba e-STUDIO166 Service Manual page 154

(3) Release the harness from the harness
clamp, disconnect 1 connector and take off
the registration roller clutch.
[N] Pickup solenoid (SOL1)
(1) Take off the rear cover.
P.2-22 "[J] Rear cover"
(2) Release the harness from the harness clamp
and disconnect 1 connector.
(3) Remove 1 screw and take off the pickup
solenoid bracket.
Note:
Be sure not to drop the bushing.
e-STUDIO166/206
PAPER FEEDING SYSTEM
Connector
Harness clamp
Pickup solenoid bracket
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
10 - 22
Registration roller clutch
Fig. 10-38
Connector
Fig. 10-39
Bushing
Fig. 10-40
Screw