Toshiba e-STUDIO166 Service Manual page 143

[B] Bypass tray
(1) Take off the bypass unit.
P.10-10 "[A] Bypass unit"
(2) Release each latch to take off the front and
rear tray arms.
(3) Take off the bypass tray.
[C] Bypass separation pad
(1) Take off the bypass unit.
P.10-10 "[A] Bypass unit"
(2) Remove 2 screws and take off the bypass
separation pad unit.
(3) Remove 1 screw on the bottom of the bypass
separation pad unit, and take off the cover.
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
Latch
Fig. 10-9
Bypass separation pad unit
Fig. 10-10
Fig. 10-11
10 - 11
Bypass tray
Cover
e-STUDIO166/206
PAPER FEEDING SYSTEM
10