Chapter 4 System Equipment 4-1 To - Hitachi EH-150 Applications Manual

Chapter 4
Name and function of each parts
7) Lock button
No. Name
1) LED cover
2) E.CLR switch
3) Reset switch
4) Dip switch
5) RS-232C connector
6) Ethernet connector
7) Lock button
System equipment
1) LED cover
2) E.CLR switch
3) Reset switch
4) Dip switch
5) RS-232C connector
6) Ethernet connector
LINK
Transfer
speed
Refer to "Section 4.2 LED indications" for details.
Used to clear error.
Used to restart the module.
Used to set operation mode.
No use.
RJ45 type connector.
[LINK LED] Green: Cable is connected.
[Transfer speed LED] Orange: 10Mbps
When dismounting the module from a base unit, press this button and lift up the module.
If necessary, the module can be fixed using a screw (M4, 10mm) after installation on the
base unit.
Type
Weight
Dimensions (mm (in.))
Function
Green: 100Mbps
4-1
Chapter.4 System equipment
EH-ETH2
0.12 kg (0.26 Lb.)
Remarks