Advertisement
Operating the Water Tank
According to the six steps below, firmly place the mist fan on the ground and add water inside the water tank.
Note: Do not take out the water tank before unplugging the power cord, hot water (40℃ and above) is not
allowed to be added in the water tank.
Note: Do not add dirty or chalky water in your tank, instead, add air-conditioned water or fresh water to
ensure longer life for your fan.
Operating the Fan
1. Insert plug to the electrical outlet, make sure that the indicator light is on as shown above.
2. Press "OFF" button, to turn off the fan.
3. Press "ON/SPEED" button, to choose the wind speed-Low, Med, High that
matches the light on the control panel.
4. Press "SWING" button, to change the wind direction, meanwhile the
corresponding light switches on. Press this button again to stop oscillation. The wind
angle of upwards and downwards is done manually. Set the desired wind
angle moving the guard and the motor of the fan up and down.
5. Press "ION" button, to turn the Ionizer feature on/off (the fan must be operating
for Ionizing to work). When the ionizer is turned on, it will assist in the purification of
the room air.
6. Press "MIST" button, the light is on, the mist will spread out of the front mist
plate.
"MIST" button can be operated separately or worked together with the fan, this will
result in a cool feel wind. If the mist function is used separately, it can increase
humidity in the air.
Advertisement
