Filling The Water Tank; Operation - Russell Hobbs RHMF18 Instructions & Warranty

1: First base is installed in place of the main stable
2: The head fixed in the main part of the bearing hole
3: Installed guard and blade, and net fixed firmly lock the lookout Network

Filling the water tank

Place the fan on a flat, stable floor, then add water for the humidifying function as follows:
1. Open the water tank
cover.
4. Over a sink, turn the water 5. Screw off the tank cap, and
tank so the outlet cap is
facing upwards.

Operation

"Normal": Wind flow based on Low/Med/High speed.
2. Lift out the water tank
add water.
panel.
3. Take out the water tank.
6. Screw tank cover tightly, and
put it into the fan, then close
*Insert plug to the electrical outlet, and the indicator
light turns on.
*Press "ON/SPEED" button to choose the wind for
low, Med, High speed that matches the light on the
control panel.
*Press "MODE" to choose the wind type from one
of the following: