Advertisement
Note: When the mist function is on, an apparent mist will be observed. Such an emission is quite normal and
to
should
7.
Press "TIMER" button to set the time using the timer function. Sets the time between 1 to 15 hours and
switches the fan off after the preset time. There are 4 indicator lights of automatic timing. To set a time of 1
hour you need to press the button once and to set 15 hours of running time you need to press 15 times and
all the 4 indicator lights will light up.
WARNING
Do not take out the plastic tube on the front of your fan.
Remote Control: must be aimed at the infra-red port (as shown in the picture) when using it. If the remote
control doesn't work, please first check the inside battery and change to new batteries if needed.
Notes:
Change the batteries with new and same types, otherwise your remote control may not operate properly.
Remove the batteries out of the remote control if you won't use the remote control for a long time. Old
batteries may damage your remote control.
Safety Precautions
1. Make sure the fan and the power cord is not damaged before operating your fan. In case of damage,
consult your authorized technical service provider.
2. Do not place the fan or any part close to flammable materials and heating appliances.
3. Do not install your fan onto wall or ceiling.
4. Avoid touching moving parts.
5. Never plug the power cord before the installation has been completed.
6. Ensure voltage used corresponds with the voltage indicated.
7. Place your fan in dry and stable surfaces. Do not use the fan in wet environments such as the bath-tub,
swimming pool and bathrooms.
not
change
the
settings
of
your
appliance.
Advertisement
