Advertisement
Introduction
Thank you for purchasing this product. Please read this instruction manual thoroughly before operating it in
order to use the fan correctly and efficiently.
Working Elements
The Electric Mist Fan uses ultrasonic vibration elements, atomizes the water to 1-5 micro ultra-particles, and
spreads the mist to the air through wind. This increases the cool humidity which makes you feel cool in a
single room or entire home.
Assembly Chart and Technical Specifications
1. Front guard ornament
2. Front guard
3. Blade cap
4. Blade
5. Guard mounting nut
6. Rear guard
7. Motor
8. Adjust knob
9. Fan body
10. Base
11. Wheel
12. Base nut
12
13. Mist tube fixer
14. Mist tube
How to Assemble
Please reference the picture and assemble the fan following the below steps:
1) Fix the four wheels 11 into the base 10.
2) Install motor 7 on the fan body 9, and fasten the adjust knob 8.
3) Install fan buoy 9 on the base 10, and fasten the base nut 12.
4) Install rear guard 6 on the motor shaft 16, then fasten the guard mounting nut 5.
5)
Install the blade 4 on the motor shaft 16, then fasten blade cap 3 in an anticlockwise direction.
6) Make the front guard 2 face to face rear guard 6, and push down the front guard 2 properly.
7) Set one side mist tube 14 into front guard ornament 1, the other side mist tube insert the mist tube fixer.
Assembling the Stand Fan Body to the Base
1. Take out the base nut under the body.
2. Use the base nut to assemble the body to the base (black base holes are in
downward position).
3.
Place and fix the wheels into their holes on the base and press them firmly. The
wheels have been supplemented with the feature of clips
Advertisement
