Hotpoint MWH424.1X Service Information page 42

Indesit Company
X. Outer Door Glass
1. Release the microwave from its housing.
2. Remove the door assembly (W).
3. Using a flat knife, gently ease the inner door panel from the inner door.
4. There are plastic clips securing it to the panel. The seal will detach.
5. Remove the six screws securing the inner panel to the outer door.
6. On re-assembly, locate the seal round the inner door panel. Very slight lubrication will assist the location
and replacement whilst clipping back into place. See Figs. 54-59.
Fig. 54
Fig. 57
Y. Inner Door Glass
1. Release the microwave from its housing.
2. Remove the outer door glass (X).
3. Invert the inner panel, locate and remove one screw securing the glass by a retainer.
4. Lift the glass clear. See Figs. 60-61.
Fig. 60
Service Manual UK
Fig. 55
Fig. 58
Fig. 61
42 of 45
Fig. 56
Fig. 59
English