Hotpoint MWH424.1X Service Information page 36

Indesit Company
H. Base
1. Release the microwave from its housing.
2. Remove the oven plate and coupler.
3. Remove the door assembly (W).
4. Remove the left and right side panels.
5. Using suitable protection, carefully lay on its side.
6. Remove the seven screws securing the front brown trim.
7. Remove the five remaining screws securing the base and lift off.
See Fig. 20.
I Base Element
1. Release the microwave from its housing.
2. Remove the oven plate and coupler.
3. Remove the left hand side panel viewed from rear.
4. Disconnect the wiring.
5. Remove the two 7mm bolts.
6. Using suitable protection, carefully lay on its side.
7. Remove the base (H).
8. Remove one screw and lift off the white air duct.
9. Remove the 7mm nut positioned in the base.
10. The element can now be lifted clear. See Figs. 21-25.
Fig. 21
Service Manual UK
Fig. 22
Fig. 24
36 of 45
Fig. 20
English
Fig. 23
Fig. 25