Hotpoint MWH424.1X Service Information page 41

Indesit Company
V. Turntable Motor
1. Release the microwave from its housing.
2. Remove the plate, keyway coupler and washer.
3. Carefully place the microwave on it's side.
4. Remove the one screw and disengage the two lugs to lift the panel clear.
5. Disconnect the wiring. See Figs. 48-50.
Fig. 48
W. Door Assembly Removal
1. Release the microwave from its housing.
2. Leave the door closed.
3. Remove the small access panel each side, each held by two screws.
4. Unhook the tension spring on each side.
5. Remove the two hinge securing screws each side.
6. Lift the door complete with hinges clear and place on a protected surface.
7. Remove the three screws securing the bottom damper. See Fig. 51-53.
Fig. 51
Service Manual UK
Fig. 49
41 of 45
Fig. 50
Fig. 52
Fig. 53
English