Dismantling Instructions - Hotpoint MWH424.1X Service Information

Built in combination microwave ovens electronic with touch & variable control
Hide thumbs Also See for MWH424.1X:
Table of Contents

Advertisement

Indesit
Company

DISMANTLING INSTRUCTIONS

Important Safety Notes
1.
Always isolate the microwave oven from the electricity supply before attempting any
servicing procedure.
2.
Always discharge the high voltage capacitor when inspecting and repairing the high voltage
side of the microwave.
3.
Never attempt to run the appliance with the cabinet removed or the door open.
4.
Refer to Safety Warnings on pages 2 and 4.
A) Cabinet Top Front Cover
1.
Release the microwave from its housing.
2.
Remove the six front screws and lift the small front cover clear. See Figs. 1 & 2.
B) Cabinet Top Cover Complete
1.
Release the microwave from its housing.
2.
Remove the twelve screws leaving three shown.
3.
Lift the panel off. See Figs. 3 & 4.
C.
Console Panel, Knobs & Circuit Boards
1.
Release the microwave from its housing.
2.
The control knobs are a push fit and pull off.
3.
Remove the cabinet top front cover (A).
Service Manual UK
Fig. 1
Fig. 2
Fig. 3
Fig. 4
33 of 45
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mwh424.1q

Table of Contents