Hotpoint MWH424.1X Service Information page 34

Indesit Company
4. Remove the five screws - three on the bottom of the internal frame and two on each external end of the
frame. Fig. 5.
5. Release the panel from the centre locating lug. See Fig 6.
6. The console panel drops forwards to gain access to the circuit boards.
7. Remove the two screws holding the console backplate to the console. See Fig. 8.
8. Remove the three screws or eleven screws and lift the applicable board clear. See Figs 5-10.
Fig. 5
Fig. 8
D. Lamp
1. Release the microwave from its housing.
2. Remove the top cover (A).
3. Remove one screw and slide the lamp holder forward.
4. Disconnect the wiring and two securing screws. See Figs 11-12.
Service Manual UK
Fig. 6
Fig. 9
Fig. 11
Fig. 12
34 of 45
Fig. 7
Fig. 10
English