Hotpoint MWH424.1X Service Information page 35

Indesit Company
E. Mains Cable, Noise Filter and Holder
1. Release the microwave from its housing.
2. Remove the top cover (B).
3. Disconnect the L & N from the noise filter.
4. Unbolt the Earth from the chassis.
5. Unhook and lift the mains cable clear.
6. Remove one screw securing the black holder and carefully release the retaining lugs.
7. Remove one screw securing the noise filter to the holder. See Figs 13-16.
Fig. 13
F. Cabinet Back Panel
1. Release the microwave from its housing.
2. Remove the three screws.
3. Disengage the panel from the locating
lugs and lift clear. See Figs 17-18.
G. Cabinet RH & LH Side Panels
1. Release the microwave from its housing.
2. Remove the cabinet top (A).
3. Remove the remaining ten screws and lift the panel clear.
See Fig 19.
Service Manual UK
Fig. 14
Fig. 17
35 of 45
Fig. 15
Fig. 16
Fig. 18
Fig. 19
English