Cisco Aironet 1520 Series Mounting Instructions page 49

Connect the streetlight power tap adapter to the access point AC power connector, as shown in
Step 9
Hand-tighten the connector.
Figure 32
1 AC power connector
Plug the streetlight power tap adapter into the outdoor light control fixture, as shown in
Step 10
Plug the outdoor light control into the streetlight power tap adapter.
Step 11
Ensure that the antennas are connected to the access point before you apply power to the access point.
Step 12
Turn on the power to the outdoor light control fixture at the designated circuits.
Step 13
78-18269-04
AC Power Connector
Cisco Aironet 1520 Series Outdoor Mesh Access Point Mounting Instructions
Powering the Access Point
Figure 32.
Figure 31.
49