Select the appropriate hole pair (see
Step 4
mount your access point.
The strand bracket contains several support hole pairs that allows the user to mount the access point onto
cable strands that are horizontal or sloped (see
strand, the access point is supported by these hole pairs:
H fixed hole pair used for a horizontal cable strand.
•
R fixed and R adjustable hole pair used for a cable strand sloping up to the right.
•
L fixed and L adjustable hole pair used for a cable strand sloping up to the left.
•
Figure 20
1
R fixed and adjustable support holes
2
L fixed and adjustable support holes
78-18269-04
Figure
Strand Bracket Support Holes
Cisco Aironet 1520 Series Outdoor Mesh Access Point Mounting Instructions
20) for the orientation of the cable strand where you will
Figure
20). Depending on the orientation of the cable
3
H fixed support holes
Mounting the Access Point
33