Saving Scans In Boxes; Using A Box Destination - Konica Minolta bizhub 600 User Manual

Saving Documents
2.4

Saving Scans in Boxes

Scanned images can be saved in boxes. Box destinations can be registered
in the address book, or a box destination can be specified directly.
The following procedure describes how to specify a box as a destination and
how to use the Direct Input tab.

Using a Box Destination

A destination where a box has been registered is called a "box destination".
Box destinations are saved on the Address Book tab and are indicated by
"B" on their buttons.
The following procedure describes how to save data to a specified box des-
tination that has already been registered.
Note
If a box destination is used, the document is automatically saved with the
default name.
To specify whether or not the marks indicating the destination type are
displayed, touch [2 User Setting] in the Utility screen, then [2 Display Set-
ting], then [2 Scan Basic Screen Default Setting], and then specify a set-
ting for the "Address Type Symbol Display" parameter. For details, refer
to User's Guide [Copy Operations].
For details on registering box destinations in the address book, refer to
the User's Guide [Network Scanner Operations].
Note
E-mail destinations are indicated by "E", FTP destinations are indicated
by "F", and SMB destinations are indicated by "S".
bizhub 750/600
2
2-15