Configuration - Lennox BAC 030 SNM 3M Installation, Operating And Maintenance Manual

DISPLAY DC60

CONFIGURATION

To communicate with the CLIMATIC™ 60 this basic parameters of internal DC60 must to be settled.
Setup menu
To do this, when the 'DC60 is powered; Simultaneously press the keys
After some seconds, the text     appears and the value '000' fl ashes.
Turn the knob to change the value to select the number 022. Then validate the code by
pressing the knob.
If the code is wrong access the setup menu is not possible and the DC60 returns to the previous
If the code is correct the display shows     .
Parameter's choice
By rotating of the knob , you can view and modify the following parameters:
•     : Address DC60 on the communication bus (Always set to value 31)
•     : Communication speed (always set to value 2)
•     : Backlight mode
•     : Backilght iIntensity
•     : Probe calibration
•     : Screen contrast
•     : Disabling 'Bip' keys
•     : Password (always set to value 22)
•     : Real time clock DC60; year
•     : Real time clock DC60; month
•     : Real time clock DC60; day
•     : Real time clock DC60; weekday (1 = Monday)
•     : Real time clock DC60; hour
•     : Real time clock DC60; minute
•    : Exits the settings mode
Changing the parameters value
To activate the modifi ed mode value:
• After selecting the desired parameter by rotating the knob
• Press the knob .
• The symbol appears on the right side of the value.
  
• Turn the knob to adjust the desired value.
• Press again on the knob
• The symbol is no longer displayed on the right side of the value.
  
• The rotation of the knob
Mandatory values
•     : 31
•     : 2
•     : 22
BALTIC-IOM-0412-E / Control manual
to confi rm your choice.
is for select a new setting.
and q.
.

d i s p l a y .
(2 buttons on the right
simultaneously)
• 77 •