Warranty - Lennox BAC 030 SNM 3M Installation, Operating And Maintenance Manual

WARRANTY

Terms and conditions
In the absence of any other written agreement, the guarantee shall only apply to design faults which occur within a 12 month period
(warranty period).
The warranty period starts on the date of commissioning and at the latest six months after the delivery of the Rooftop.
Anti-corrosion warranty
10 year warranty terms and conditions for corrosion to the Rooftop casing:
LENNOX shall guarantee the casing of its Rooftop units manufactured since May 1991 against corrosion for 10 years commencing
from the date of delivery of the material.
The warranty shall not apply in the following cases:
1. If the corrosion of the casing is caused by external damage to the protective layer such as scratches, projections, abrasion, impacts
etc...
2. If the casing is not kept continually clean in the course of maintenance work or by a specialist company,
3. If the casing is not cleaned and maintained in accordance with regulations,
4. If the Rooftop units are installed on a site or in an environment which is known to be corrosive, unless a special protective coating
has been applied by the owner for these applications, which has been recommended by a competent body not linked to the owner
and after carrying out a study of the site.
5. Nevertheless the LENNOX coating is highly resistant to corrosion, the warranty will not be applied for rooftop installed at less than
1000 m away from the sea
Note: With the exception of the casing, the rest of the machine is covered by the warranty of our general terms of sale.
Do not confuse the warranty with maintenance
The warranty will only apply if a maintenance contract has been signed, starting from the date of commissioning, and if the maintenance
contract has actually been performed
The maintenance contract must be made with a specialist, competent company.
The sole effect of any repair, modifi cation or replacement of an item during the warranty period must be to extend the material's
warranty period.
Maintenance must be carried out in accordance with regulations.
If a spare part is supplied after the expiry of the warranty period, it shall be guaranteed for a period equal to the initial warranty period
and will be subject to the same conditions.
We recommend for a contract four inspections per year (every three months), before the start of each season, in order to check the
operation of the equipment in the various operating modes.
BALTIC-IOM-0412-E / Service manual
• 67 •