Starting The Thermostat - ICM Controls SC 3006 Installation, Operation & Application Manual

Configuration Mode Settings (continued)
8. Room temperature offset
Adjust to calibrate displayed room temperature to match actual room temperature.
Press the button to advance to the next screen.
9. Maximum compressor cycles allowed per hour (d, 2-6).
– – = as many as needed, 2-6 = maximum cycles/hour
Press the button to advance to the next screen.
10. Status indicator light (ON, OFF).
Press the or button to select.
To exit configuration mode, press the button for 6 seconds.
CAUTION!: Do not use air conditioning when the outdoor temperature is below 50 degrees. This
Note: First button press activates backlight only.
1. Move the Fan Auto/On switch to the Auto position.
2. Press the button to enter desired operating mode.
0
(+9°F to - 9°F) (+5°C to -5°C)

Starting the Thermostat

can damage your air conditioning system and cause personal injuries.
.
ON
Fan
Mode