Specifications; Important Safety Information; Package Contents/Tools Required - ICM Controls SC 3006 Installation, Operation & Application Manual

Electronic auto changeover 7-day programmable hardwired
Table of Contents

Advertisement

Electrical Rating: • 24 VAC (18 to 30 VAC)
• 3 amp maximum total load
Temperature control ranges: 45°F to 90°F Accuracy: ± 1°F
System configurations: 1-stage heat, 1-stage cool, heat pump, gas, oil, electric
Timing: Anti-short Cycle: 5 minutes
Backlight Operation: 10 seconds
Terminations: C, RH, RC, W, Y, B, O, G, S1, S2
WARNING!: Always turn off power at the main power supply before installing, cleaning, or removing
thermostat.
• This thermostat is for 24 VAC applications only; do not use on voltages over 30 VAC
• Do not short across terminals of gas valve or system control to test operation; this will damage your
thermostat and void your warranty
• All wiring must conform to local and national electrical and building codes
• Do not use air conditioning when the outdoor temperature is below 50 degrees; this can damage your
A/C system and cause personal injuries
• Use this thermostat only as described in this manual
Package includes: SimpleComfort
wiring labels, screws and wall anchors, Installation, Operation and Application Guide.
Tools required for installation: drill, hammer, screwdriver.

Specifications

Important Safety Information

Package Contents/Tools Required

®
3006 programmable thermostat on base, labeled thermostat cover,
• 1 amp maximum per terminal


Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents