Setting Dynamic Curve; Firmware Update; Factory Settings - Viscount Cantorum VI Owner's Manual

Owner's Manual – Viscount CantorumVI

4.7 SETTING DYNAMIC CURVE

The CantorumVI keyboard is touch sensitive. So it's possible to choose among 3 dynamic curves
and 4 fix velocity values that will influence the sound of orchestral voices and the MIDI messages
sent by the instrument. Organ voices are not influenced by dynamic curve.
To select one of the seven choices turn on the instrument while pressing [MEM2] + [MEM3] +
[MEM4]. One of the Transposer LED will turn on indicating the actual selected curve in this order
(left to right): Soft, Normal, Hard, Fixed at 32, Fixed at 64, Fixed at 96, Fixed at 127. Select one of
them pressing repeatedly [TRANSPOSER].
To exit from this mode turn Off the instrument.

4.8 FIRMWARE UPDATE

To proceed with firmware upload turn on the instrument while pressing the first five "white" keys
(from C2 to G2). All the LEDs of Temperament will turn on. The instrument will wait the
transmission of new firmware modules to be sent via MIDI. Firmware modules are MIDI files that
must be transmitted with an external sequencer and sent to the MIDI IN port of the CantorumVI.
For example, if using a computer, it is necessary to make an appropriate program playing the MIDI
file that sends it to the PC MIDI OUT port. During the reception of the Firmware the LED [PIPE
ENS.1] will blink. At the end of the upload the instrument will automatically restart. In case of
errors during the upload all the Temperament LEDs will start blinking. In this case restart and try
with the procedure another time.

4.9 FACTORY SETTINGS

Factory settings are initial configuration of the instrument made at the production of the instrument.
Restoring the Factory Settings means replacing all the configurations and memorizations made by
user, with the original ones.
To restore the factory settings on the instrument turn on while pressing [SOUND STYLE] +
[MAN.I OCT.UP] + [MAN.II OCT.DOWN]: all LEDs will turn on for about 3 seconds, then the
instrument will restart with the original factory settings.
EN - 16