Print Formatting; Print Formatting Commands - Rice Lake 880 Technical And Service Manual

7.0

Print Formatting

The 880 provides five print formats. Formats
mode of operation when the
other ticket format using the <H1> formatting command.
setpoint configuration. The
viewing the accumulator value, or if a setpoint
accumulate, but not print.
Each print format can be customized to include up to 1000 characters of information (300 for
company name and address, on print tickets. You can use the indicator front panel (
commands, or the Revolution
7.1

Print Formatting Commands

Table 7-1 lists commands you can use to format the 880 print formats. Commands included in the format strings
must be enclosed between < and > delimiters. Any characters outside of the delimiters are printed as text on the
ticket. Text characters can include any ASCII character that can be printed by the output device.
Command
<G> Gross weight in displayed units (See notes 1 and 2 below)
<N> Net weight in displayed units (See notes 1 and 2)
<T> Tare weight in displayed units (See notes 1 and 2)
<A> Accumulated weight in displayed units
<AC> Number of accumulator event (5-digit counter)
<AT> Time of last accumulator event
<AD> Date of last accumulator event
<SCV> Setpoint captured value
<STV> Setpoint target value
<SPM> Setpoint mode (gross or net label)
<SNA> Setpoint name
<SN> Setpoint number
<SPV> Setpoint preact value
<TI> Time
<DA> Date
<TD> Time and date
<UID> Unit ID number (See note 3)
<CN> Consecutive number (See note 3)
<H1> Ticket header (HDRFMT)
<NLnn> New line (nn = number of termination (<CR/LF> or <CR>)
characters) (See note 4)
<SPnn> Space (nn = number of spaces) (See note 4)
<SU> Toggle weight data format (formatted/unformatted)
(See note 5)
<AN> Alibi Ticket Number
<CR> Carriage return character
and
GFMT
key is pressed (see Table 7-2 on page 70).
PRINT
is printed if the accumulator is embedded and the print key is pressed while
ACCFMT
PSHACM
®
configuration utility to customize the print formats.
Description
Table 7-1. Print Format Commands
will be printed in a ticket format based on the current
NFMT
HDRFMT
is printed if
SPFMT PSHPRT
is set to ON. If
PSHACM
GFMT/NFMT/
ACCFMT
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
can be inserted into any
is set to or in the
ON WAITSS
is set to , it will
ONQUIE
), such as
HDRFMT
menu), EDP
PFORMT
Ticket Format
SPFMT
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Print Formatting 69