Rice Lake 880 Technical And Service Manual page 42

REGION Menu, REGULA / INDUST Submenu
Parameter Choices
REGULA NTEP
CANADA
INDUST
NONE
OIML
REGWOR GROSS
BRUTTO
DECFMT DOT
COMMA
TIME TFORMT
TSEP
SET
DATE DFORMT
D SEP
SET
INDUST submenu
SNPSHT DISPLY
SCALE
ZTARE NO
YES
KTARE NO
YES
MTARE REPLAC
REMOVE
NOTHIN
NTARE NO
YES
CTARE NO
YES
PRTMOT NO
YES
PRTPT NO
YES
OVRBAS CALIB
SCALE
36 880 Installation Manual
Description
Regulatory mode. Specifies the regulatory agency having jurisdiction over the scale
site.
The value specified for REGULA affects the function of the front panel
Note
TARE and ZERO keys.
• OIML, NTEP, and CANADA modes allow a tare to be acquired at any
weight greater than zero. NONE allows tares to be acquired at any weight
value.
• OIML, NTEP, and CANADA modes allow a tare to be cleared only if the
gross weight is at no load. NONE allows tares to be cleared at any weight
value.
• NTEP and OIML modes allow a new tare to be acquired even if a tare is
already present. In CANADA mode, the previous tare must be cleared
before a new tare can be acquired.
• NONE, NTEP and CANADA modes allow the scale to be zeroed in either
gross or net mode as long as the current weight is within the specified
ZRANGE. In OIML mode, the scale must be in gross mode before it can be
zeroed; pressing the ZERO key in net mode clears the tare.
• INDUST provides a set of subparameters to allow customization of tare,
clear, and print functions in non-legal-for-trade scale installations. See
submenu below.
Sets the term displayed when weighing in gross mode. Selecting BRUTTO replaces
the Gross annunciator with Brutto.
Specifies whether decimal numbers are displayed using a period (DOT) or a comma.
Allows you to set the current time, and the time format and separator character.
Allows you to set the current date, and date format and date separator character.
Display or Scale weight source.
Remove tare on ZERO.
Always allow keyed tare.
Multiple tare action.
Allow negative or zero tare.
Allow CLEAR key to clear tare/accumulator.
Allow print while in motion.
Add PT to keyed tare print.
Zero base for overload calculation.
CALIB = Calibrate Zero
SCALE = Scale Zero