Table of Contents
Advertisement
•
you spill something or put something on the
control panel for more than 10 seconds (a pan,
a cloth, etc.). An acoustic signal sounds and the
hob deactivates. Remove the object or clean the
control panel.
•
the hob gets too hot (e.g. when a saucepan
boils dry). Let the cooking zone cool down
before you use the hob again.
•
you use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
•
you do not deactivate a cooking zone or change
the heat setting. After some time
and the hob deactivates.
The relation between the heat setting and the
time after which the hob deactivates:
Heat setting
, 1 - 2
3 - 4
5
6 - 9
AUTOMATIC HEAT UP
If you activate this function you can get a necessary
heat setting in a shorter time. The function sets the
highest heat setting for some time and then
decreases to the correct heat setting.
To activate the function the cooking
zone must be cold.
To activate the function for a cooking zone:
turn the knob for a cooking zone to position A.
comes on in the display. Immediately set the
correct heat setting.
To deactivate the function: turn the knob to the
off position.
POWER FUNCTION
This function makes more power available to the
induction cooking zones. The function can be
activated for the induction cooking zone only for a
limited period of time. After this time the induction
cooking zone automatically sets back to the highest
heat setting.
To activate the function for a cooking zone:
touch
.
comes on.
comes on
The hob deactivates
after
6 hours
5 hours
4 hours
1.5 hour
To deactivate the function: change the heat
setting.
TIMER
Count Down Timer
You can use this function to set how long the
cooking zone should operate for a single cooking
session.
First set the heat setting for the cooking zone then
set the function.
To set the cooking zone: touch
again until the indicator of a necessary cooking
zone comes on.
To activate the function: touch
to set the time (00 - 99 minutes). When the
indicator of the cooking zone starts to flash slowly
the time counts down.
To see the remaining time: set the cooking zone
with
. The indicator of the cooking zone starts to
flash quickly. The display shows the remaining time.
To change the time: set the cooking zone with
. Touch
or
.
To deactivate the function: set the cooking zone
with
and touch
back to 00. The indicator of the cooking zone goes
out. To deactivate the function you can also touch
and
at the same time.
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch
CountUp Timer (The count up timer)
You can use this function to monitor how long the
cooking zone operates.
To set the cooking zone: touch
again until the indicator of a necessary cooking
zone comes on.
To activate the function: touch
comes on. When the indicator of the cooking
zone starts to flash slowly the time counts up. The
display switches between
(minutes).
To see how long the cooking zone operates:
set the cooking zone with
cooking zone starts to flash quickly. The display
shows how long the zone operates.
again and
of the timer
. The remaining time counts
.
again and
of the timer.
and counted time
. The indicator of the
9
Advertisement
Table of Contents
