Power Management Function; The Child Safety Device - Zanussi ZCI660MBC User Manual

To deactivate the function: set the cooking zone
with and touch
cooking zone goes out.
Minute Minder
You can use this function as a Minute Minder
when the hob is activated and the cooking zones
do not operate. The heat setting display shows
To activate the function: touch
of the timer to set the time. Cooking zones
display deactivates automatically after 10 seconds.
When the time comes to an end, the sound
operates and 00 flashes.
To stop the sound: touch
To deactivate the function: activate for a short
time and deactivate left front cooking zone.
The function has no effect on the
operation of the cooking zones.
STOP+GO
This function sets all cooking zones that operate to
the lowest heat setting.
The function does not stop the timer functions.
To activate the function: touch
on.
To deactivate the function: touch
previous heat setting comes on.
If you change the heat setting, the
function stops and the display shows
the new heat setting.
LOCK
You can lock the sensors on the hob while cooking
zones operate.
Set the heat setting first.
To activate the function: touch
on for 4 seconds. The Timer stays on.
To deactivate the function: touch
previous heat setting comes on.
When you deactivate the hob, you also
deactivate this function.

THE CHILD SAFETY DEVICE

This function prevents an accidental operation of
the hob.
10
or . The indicator of the
. Touch
.
. comes
. The
. comes
. The
To activate the function: the hob must be
deactivated. Touch
comes on for 4 seconds.
To deactivate the function: the hob must be
deactivated. Touch
comes on for 4 seconds.
.
To override the function for only one cooking
or
time: activate the cooking zone.
Touch until
setting in 4 seconds. You can operate the hob.
When you deactivate the appliance the function
operates again.

POWER MANAGEMENT FUNCTION

• All cooking zones are connected to one phase.
See the illustration.
• The phase has a maximum electricity load.
• The function divides the power between
cooking zones.
• The function activates when the total electricity
load of the cooking zones is exceeded.
• The function decreases the power to the other
cooking zones.
• The heat setting display of the reduced zones
changes between two levels.
until flashes. Touch
until flashes. Touch
comes on.
comes on. Set the heat
.
.