Table of Contents
Advertisement
Automax
AUTOMAX supplies the zone with full heat for a specific
period, and then adjusts down to the setting you have
chosen.
Turn the control button clockwise to “A”, then select
l
the required setting.
The display alternates between A and the setting chosen.
The period for which AUTOMAX is connected depends
on the setting chosen.
Connection of child safety
device on zones
Turn the 2 single zone-control buttons anticlockwise
l
to “S” at the same time.
0
0
beide gleichzeitig auf „S”
FO 2528
The display will show:
FO 2530
When you turn on a zone the display will show:
FO 2530
You can disconnect the child safety device as follows:
Turn all the cooking zone control buttons to 0.
l
Turn the 2 single zone-control buttons anticlockwise
l
to “S” at the same time.
The light under the “key” symbol in the display will
disappear. The zones can now be used.
0
CHEC control: Autostop
If you forget to turn a cooking zone off after use, it will be
disconnected automatically after a specific period of time.
The higher the setting, the shorter the time before the
zone is disconnected.
Setting
AUTOSTOP
1
6 hours
2
6 hours
3
5 hours
4
5 hours
5
4 hours
6
1½ hours
7
1½ hours
8
1½ hours
9
1½ hours
When the autostop function is activated the display will
show:
FO 2527
The zones cannot be used.
To activate the cooking zones:
Turn all the control buttons to 0. The zones can now
l
be used.
Residual heat indicator
When you switch off a zone, an “H” in the display indicates
that the zone is still hot. The residual heat indicator will
continue to be illuminated until the zone reaches a
temperature of approx. 50°C.
FO 2526
7
Advertisement
Table of Contents
