Commodore PC Ms-Dos 3.2 User's Manual page 375

P —R303
Read error in filename
/-^ [Edlin][Find]
■ MS-DOS could not read the entire file.
Read fault error reading drive x:
(\ [ms-dos]
■ This is a device error. See Appendix D, 'Disk and Device
Errors."
Reading source file(s)...
[Xcopy]
-—^ ■ Xcopy is now reading the source files that you specified
Reinsert diskette for drive x:
[Format]
f~*\ ■ Reinsert the disk being formatted in the indicated drive.
Replace filename? (YIN)
>^ [Replace]
( ■ Replace displays this prompt ifyou specify the /w switch.
Press Y if you want to replace the existing file, or AT if you do
^■^ not want to replace the file.
Replacing filename
[Replace]
(//-""^ ■ Replace displays this prompt to let you know that it is replac
ing this file that exists on your disk.
-^ Requested Screen Shift out of range
( " [Mode]
■ You cannot shift the display any farther.
f^) Resident part of PRINT installed
[Print]
■ This is the first message that ms-dos displays when you issue
/—^ the Print command It means that to process the Print com
mand with other processes, available memory has been
reduced by several thousand bytes.
(~^ Resident portion of MODE loaded
[Mode]
■ Part of the Mode program is now resident in memory, and
f~*\ available memory has been reduced by several thousand bytes.