Commodore PC Ms-Dos 3.2 User's Manual page 350

278 Appendix E MS-DOS Message Directory
Convert lost chains to files (Y/N)?
[Chkdsk]
■ Chkdsk displays this message if it finds information on the
disk that isn't allocated properly in the disk's File Allocation
Table.
If you type Y (for Yes) in response to this prompt, chkdsk , j
recovers the lost blocks it found when checking the disk. x-^
Chkdsk then creates a proper directory entry and a file for
each lost chain with a filename of the form: filennnnxhk. If you
type N (for No), chkdsk frees the lost blocks so that they can
be reallocated and does not recover any data that was in those
lost blocks.
Copy another diskette (Y/N)?
[Diskcopy]
■ The Diskcopy command has completed processing.
Type Y (for Yes) if you want to copy another disk, or AT
(for No) if you don't.
Copying t tracks
n Sectors/Track, s Sides
[Diskcopy]
■ Diskcopy displays this message during copying. ( j
Copy process ended
[Diskcopy]
■ Diskcopy could not copy the entire disk
Use the copy or xcopy command to copy specific files onto
the disk.
Copyright 1981,82,83,84,85,86 Microsoft Corp. W'
[MS-DOS]
■ This message appears on mostMS-DOS utility and command
banners.
Corrections will not be written to disk
[Chkdsk]
■ There are errors on the disk, but Chkdsk will not correct them
because you did not specify the li switch.
You must specify the chkdsk switch to correct disk errors. I)
Current date is mm-dd-yy
[Date]
■ The Date command displays this message.
Enter the correct date and press return.