Commodore PC Ms-Dos 3.2 User's Manual page 164

92 MS-DOS User's Reference
u
Tree Tree
Purpose:
Displays the path (and, optionally, lists the contents) of each
directory and subdirectory on the given drive.
Syntax:
tree [drive.] [/f]
Comments:
The tree command lists the full path of each directory and sub
directory on the specified drive.. (J
The drive-, option specifies the drive that you want to use. If you
do not specify this option, tree uses the default drive.
The /f switch displays the names of the files in each directory.
Example:
If you want to print a list of the directory and filenames on the
disk in drive B, you can use the following command:
tree b: /f > prn i J
U
u
u
u
u
u