Before You Begin - Hoover 5210 HERITAGE Instruction Manual

Before You Begin

This cleaner must be operated in accordance with these instructions and used only for domestic
household cleaning to remove DRY dirt and dust from household carpets, flooring and fabrics. This
cleaner is not fit to be used as an industrial cleaner. It is not designed for the collection of vitreous
building material including particle board, construction products and similar products such as wood/
fibres, cement, fillers, fibre glass or excessive sand. The infrequent pick-up of these materials in these
circumstances may be harmful to your cleaner and may void the manufacturer' s warranty.
Please read these instructions thoroughly
This will ensure you obtain full benefit from your new cleaner. Keep this instruction manual in a handy
place for future reference.
Important
Always switch the cleaner off and remove the plug from the electricity supply before cleaning your
appliance, when not in use, or attempting any maintenance task. The cleaner must only be connected
to an AC power supply at the voltage shown on the rating plate. This cleaner should only be used for its
intended purpose as described in these instructions.
Precautionary measures:
1. Do not operate the vacuum cleaner too close to heaters, radiators and other hot surfaces.
2. Before inserting the plug into the wall, make sure your hand is dry.
3. Before turning on the vacuum cleaner, remove any large or sharp objects from the floor or
cleaning surface in order to prevent damage to the filter.
4. When you want to pull the plug from the wall, do not use the power cable, gently pull the
plug from the power socket.
5. Do not use the vacuum cleaner to pick up water or liquids.