Hoover Heritage 5210 User Manual
2-in-1 cordless stick vac
Hide thumbs
Also See for Heritage 5210:
- Instructions for use manual (11 pages) ,
- Instruction manual (21 pages)
Related Manuals for Hoover Heritage 5210
Summary of Contents for Hoover Heritage 5210
- Page 1 5210 HERITAGE 2-in-1 Cordless Stick Vac Bagless Cyclonic Technology Detachable Hand Vac HEPA Filtration Foldable Handle Heritage...
- Page 3 5210 Heritage Congratulations on the purchase of your new HOOVER vacuum cleaner. There are many useful features built into your cleaner. We recommend that you carefully read this instruction manual to take advantage of these features. Features: 1. On/Off Button (on Body) 8.
-
Page 4: Before You Begin
Before You Begin The cleaner must be operated in accordance with these instructions and used only for domestic household cleaning to remove DRY dirt and dust from household carpets, flooring and fabrics. This cleaner is not fit to be used as an industrial cleaner and it is not designed for the collection of vitreous building material including particle board, construction products and similar products such as wood/ fibres, cement, fillers, fibre glass etc or excessive or frequent sand. -
Page 5: Safety Precautions And Warnings
If the power cable or plug appears damaged, do not use. If the cleaner is not working correctly, has been dropped, damaged, left outdoors or dropped into water, return the cleaner to a Hoover service agent or contact Hoover Customer Care: 1300 360 845 / sales@ hooverfloorcare.com.au / www.hoover.com.au / www.hoover.co.nz Do not pull or carry the appliance by the power cable, use the power cable as a handle or pull the power cable around sharp edges or corners. - Page 6 (continued) 15. Do not use the appliance without dust bag and/or filter in place. 16. If the power cable is damaged, return the cleaner to a Hoover service agent or contact Hoover Customer Care in order to avoid a hazard.
- Page 7 Instructions for Use Ensure the appliance is switched off and disconnected from the charger before fitting or removing accessories. Fitting the hand vac to the body a. Body of stick vac b. Hand vac c. Air inlet d. Hand Vac Release Button...
- Page 8 Instructions for Use (continued) Fitting the power brush to the body a. Body of stick vac b. Power brush c. Slide the body into the power brush until an audible click is heard. d. Power Brush Release Button...
- Page 9 Foldable Handle a. Press the Handle Release Button to unlock and fold the down the handle.
- Page 10 Instructions for Use (continued) Connection for 3-in-1 accessory a. Crevice nozzle b. Sofa brush...
- Page 11 Fitting the 3-in-1 accessory Soft brush Crevice tool Sofa brush 3-in-1 accessory Accessory holder...
- Page 12 Instructions for Use (continued) Charging the cleaner 1. Connect the power plug on the Charging Base to the power socket. 2. Connect the stick vac to the charging base. The stick vac should be able to stand alone once correctly connected to the charging base.
- Page 13 How to operate the stick vac On/Off Button Hand vac Dust Cup Release Button/ Power Indicator 1. Press the Hand Vac Release Button to release the hand vac from the body. 2. Press the On/Off button to turn on the hand vac. The Dust Cup Release Button/Power Indicator will illuminate when the hand vac is operational.
- Page 14 Instructions for Use (continued) Operating the power brush 1. The power brush on this stick vac can be used on short haired carpet and hard floors. 2. The power brush has been manufactured with a safety switch. In the event the power brush jams, the stick vac will switch off as a precautionary measure to avoid damage or injury.
- Page 15 Use of 3-in-1 accessory This stick vac comes with a 3-in-1 accessory: Soft Brush For cleaning bookshelves, curtains etc. Crevice Tool To clean in between tight spaces. The crevice tool can be used to clean hard to reach places. Sofa Brush The sofa brush can be used for cleaning furniture, sofas, Small brush...
-
Page 16: Maintenance
Maintenance Cleaning and changing parts Dust Cup Release Button/ Dust cup and filter system cleaning Power Indicator 1. Push the Dust Cup Release Button/Power Indicator to release the dust cup from the hand vac. Dust cup assembly 2. To empty debris from the dust cup, separate the dust cup from the filter assembly as shown. - Page 17 Power brush cleaning Use a screwdriver to rotate the locking button to the unlock position. Locking Button Remove the cover, take the roller out and clean it gently by removing all dust, dirt etc. (do not clean with water or any liquids). The roller can also be replaced with a new roller if necessary.
-
Page 18: Troubleshooting
• Has the hand vac been correctly assembled to the body of the stick vac? The cleaner has • Has the stick vac been fully charged – 6-8 hours? been charged • The battery may require replacement. Please contact Hoover Customer but unable to get Care for assistance. enough run time... -
Page 19: Customer Care
Customer Care Please contact Hoover Customer Care: 1300 360 845 or NZ: (09) 263 7573 to find your local spare parts provider or for further assistance. Part Part Number Filter 32200739 Cone filter assembly 32200738 Brush bar assembly 33701711... - Page 20 Conditions of warranty Your Hoover cleaner, in the case of domestic use, has a one not carried out by an authorised Hoover Service Agent or from year parts and labour warranty against product defects the use of non-genuine parts. If any part is no longer available or...