Hoover 5210 HERITAGE Instruction Manual page 12

Instructions for Use
Charging the cleaner
1. Connect the power plug on the charging base to
2. Connect the stick vac to the charging base. The
3. The indicator on the cleaner turns red whilst it is
Charging
Base
4. Once the stick vac has been charged it can be
Note:
it is recommended that the charging base is
unplugged from the power supply.
IMPORTANT
When the voltage falls below the required level,
the vacuum cleaner will turn off to protect the
battery. You must then promptly charge the
vacuum.
(continued)
the power socket.
stick vac should be able to stand alone once
connected correctly to the charging base.
charging. Once fully charged the indicator will
turn green (approximately 6-8 hours).
removed from the charging base for use or it
can remain on the charging base which also
acts as a holder.
Once the stick vac has been fully charged,