Allen-Bradley PanelView 5500 User Manual page 100

Chapter 7 Troubleshooting
100
To restore the terminal to its default state, follow these steps.
1. Cycle power to the terminal.
The Allen-Bradley logo displays during startup.
2. Wait a few seconds, and then touch the Allen-Bradley logo when the
copyright line becomes brighter.
Copyright ©2015 Rockwell Automation
TIP
The normal startup is suspended so the restore procedure can initiate.
You are asked if you want to restore the terminal to its defaults.
3. Tap Yes to continue, or Cancel to resume a normal startup.
You are asked to confirm the removal of all user files such as applications.
4. Tap Yes to continue, or Cancel to resume a normal startup.
Progress messages appear on the screen during the restore operation.
When the restore is complete, the terminal performs a normal startup.
5. From the Settings menu, update the terminal network settings.
6. Download an application to the terminal by using the View Designer
application.
7. From the Settings menu, update any remaining terminal settings as
appropriate.
Refer to Disable Downloads to the Terminal on page 57
modify device configuration settings.
Rockwell Automation Publication 2715-UM001A-EN-P - July 2015
Wait a few seconds before you touch the logo. If you touch the logo too
soon during startup, this error text is displayed under the copyright
line.
ERROR! FEHLER! ERREUR! ERRORE!
If this error text is displayed, cycle power to the terminal and wait a
few seconds longer before you touch the logo.
for details on how to