Teltonika RUT230 User Manual page 68

Field Name
1. Name
2. Protocol
3. Source zone
4. Source MAC address
5. Source address
6. Source port
7. Destination zone
8. Destination IP address
9. Destination port
10. SNAT IP address
11. SNAT port
12. Extra arguments
Sample value
SNAT
TCP/UDP/Any/ICMP/Custom
LAN/VPN/WAN
any
any
any
LAN/VPN/WAN
Select from the list
any
"10.101.1.10"
"22"
Explanation
Used to make rule management easier
Protocol of the packet that is being matched against
traffic rules.
Match incoming traffic from this zone only
Match incoming traffic from these MACs only
Match incoming traffic from this IP or range only
Match incoming traffic originating from the given source
port or port range on the client host only
Match forwarded traffic to the given destination zone
only
Match forwarded traffic to the given destination IP
address or IP range only
Match forwarded traffic to the given destination port or
port range only
Rewrite matched traffic to the given IP address
Rewrite matched traffic to the given source port. May be
left empty to only rewrite the IP address'
Passes additional arguments to iptables. Use with care!
68