8.4.5 L2TP
Allows setting up a L2TP server or client. Below is L2TP server configuration example.
Field name
1. Enable
2. Local IP
3. Remote IP range begin
4. Remote IP range end
5. Username
6. Password
Client configuration is even simpler, which requires only Servers IP, Username and Password.
Explanation
Check the box to enable the L2TP Tunnel function.
IP Address of this device (RUT)
IP address leases beginning
IP address leases end
Username to connect to L2TP (this) server
Password to connect to L2TP server
91