Teltonika RUT230 User Manual page 137

Field name
1. Router name
2. Host name
3. New Password
4. Confirm new password
5. Language
6. IPv6 support
7. Show mobile info at login page
8. Show WAN IP at login page
9 On/Off LEDs
10 Restore to default
Important notes:
The only way to gain access to the web management if you forget the administrator password is to reset the
device factory default settings. Default administrator login settings are:
User Name: admin
Password: admin01
Explanation
Enter your new router name.
Enter your new host name
Enter your new administration password.
Changing this password will change SSH password as well.
Re-enter your new administration password.
Website will be translated into selected language.
Enable IPv6 support on router
Show operator and signal strength at login page.
Show WAN IP at login page.
If uncheck, all routers LEDs are off.
Router will be set to factory default settings
137