Teltonika RUT230 Quick Start Manual

Login to device

1. To enter router's Web interface type http://192.168.1.1
2. Use the following parameters when prompted for authentication:
3. Configuration Wizard will start after logging in. It is necessary to complete Configuration Wizard to
setup router to correct mode. You can leave default settings but it is strongly recommended that you change
the password and enable Wireless Security.
4. Go to Status > Network and pay attention to Signal Strength. To maximize the performance try adjusting
antennas or changing location of your device to achieve best signal conditions.
LAN
This sign on the package means that it
is necessary to read the User's
Manual before you start using the
device.
Hereby, Teltonika declares that this RUT230 is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
Please visit our web site www.teltonika.lt
4
in your internet browser.
OpenVPN
860461024004296
OK
-44 dBm
This sign on the package means that all
used electronic and electric equipment
should not be mixed with general
household waste.
for more information
LTE is a trade mark of ETSI
RUT950 LTE Router
Quick start guide v3
ISO 9001
CERTIFIED
ORGANISATION