Bovie Aaron 1250 User Manual page 46

The 1250™ is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the user of the A1250™ can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the A1250™ as recommended below, according to the maximum output power of the
communications equipment.
Rated maximum output
power of transmitter
0.01
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in metres (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
The A1250™ is intended for use in the electromagnetic environment listed below. The customer or the
user of the A1250™ should assure that it is used in such an environment.
Emissions test
RF Emissions CISPR 11
RF Emissions CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/flicker
emissions
IEC 61000-3-3
User's Guide • Aaron 1250 ™
Recommended separation distances between portable and mobile RF
communications equipment and the A1250
separation distance according to frequency of transmitter in metres (m)
150 kHz to 80 MHz
d = 3.5
[
W
V
1
0.12
0.38
0.1
1.2
1
3.8
10
12
100
Guidance and manufacturer's declaration – electromagnetic emissions
Group 2
Class A
Class A
Complies
™
80 MHz to 800 MHz
d = 3.5
] [ ]
P P
E
1
0.12
0.38
1.2
3.8
12
Compliance Electromagnetic environment - guidance
The A1250™ must emit
electromagnetic energy in order to
perform its intended function.
Nearby electronic equipment may
be affected.
The A1250™ is suitable for use in
all establishments other than
domestic and those directly con-
nected to the public low-voltage
power supply network that sup-
plies buildings used in domestic
purposes.
.
800 MHz to 2.5 GHz
d = 7
[ ]
P
E
1
0.23
0.73
2.3
7.3
23
A-5