Connecting The Power Cord - Onkyo A-9150 Instruction Manual

Connecting the Power Cord

Integrated Amplifier
AC INLET
1
Connect all of your speakers and components.
2
Connect the supplied power cord to the integrated
amplifier's AC INLET.
3
Plug the power cord into an AC wall outlet.
Tip
• To reduce noise, do not tie signal cables together with the power
cable. Wire them so that they are away from each other.
• Depending on the country, the integrated amplifier may be
polarity-sensitive. In this case, plug the power cord in a way that
provides the best sound quality.
Note
• Never disconnect the power cord from the integrated
amplifier while the other end is still plugged into a wall
outlet. Doing so may cause an electric shock. Always
disconnect the power cord from the wall outlet first, and then the
integrated amplifier.
• Turning on the integrated amplifier may cause a momentary
power surge that might interfere with other electrical equipment
on the same circuit. If this is a problem, plug the integrated
amplifier into a different branch circuit.
• Do not use a power cord other than the one supplied with the
integrated amplifier. The supplied power cord is designed
exclusively for use with the integrated amplifier and should not
be used with any other equipment.
• Turn the unit's power to standby before disconnecting the power
cord from the outlet.
En
20
Supplied power cord
To an AC wall outlet
(Plug type varies from
country to country.)