Connecting the Power Cord
To wall outlet
STANDBY
indicator
Understanding Common Operations
VOLUME
INPUT
buttons
STANDBY/ON
STANDBY
indicator
STANDBY/
ON
18
When the power cord is connected to the AC outlet,
the FR-X7A enters Standby mode. The STANDBY
indicator lights up.
Turning the unit on and off
Press STANDBY/ON on the unit or on the remote con-
troller.
If you press the same button again, the unit will turn
off and enter Standby mode.
Tip
When you start playing (or turn on the power to) an Onkyo
CD recorder or cassette tape deck that is connected to the
FR-X7A via an
power to the FR-X7A is automatically turned on. Also, if you
turn on or off the power to the FR-X7A, the power to such a
device is automatically turned on or off (standby).
Adjusting the volume
Operating with the unit
INPUT buttons
Turn VOLUME clockwise to increase the volume or
counterclockwise to decrease the volume.
Using the remote controller
Press VOLUME
Selecting a source
VOLUME
/
You can select CD, MD, FM, AM, or connected exter-
nal audio/video equipment (CD-R, TAPE, LINE, DIGI-
TAL) as the audio source.
To select the audio source, press the INPUT
button repeatedly.
cable and RCA/phono audio cables, the
on the remote controller.
/
CD
MD
DIGITAL
LINE
or
FM
AM
TAPE
CD-R