Cable And Jacks - Onkyo A-9150 Instruction Manual

Cable and Jacks

Optical digital audio
Coaxial digital audio *
Analog audio (RCA)
Note
• Push plugs in all the way to make good connections (loose connections can cause noise or
malfunctions).
• To prevent interference, keep audio cables away from power cords and speaker cables.
• The integrated amplifier's optical digital jack have shutter-type covers that open when an
optical plug is inserted and close when it's removed. Push plugs in all the way.
• To prevent shutter damage, hold the optical plug straight when inserting and removing.
• Do not use digital audio signals other than PCM.
An analog audio cable can be used instead of a coaxial cable. However, we recommend that you use a coaxial or a composite video
*
cable.
En
14
Optical digital connections allow you to enjoy digital sound such as
PCM. The maximum sampling rate for PCM input is 192 kHz/24 bit,
2ch.
OPTICAL
Coaxial digital connections allow you to enjoy digital sound such as
Orange
PCM. The maximum sampling rate for PCM input is 192 kHz/24 bit,
2ch.
The integrated amplifier provides 75-ohm impedance matching.
White
L
Analog audio connections (RCA) carry analog audio.
Red
R
To use (Remote Interactive), you need to connect your Onkyo
CD Player, Tuner, Network Audio Player, or
integrated amplifier with an
Dock to the
cable.
Right!
Wrong!