Utax P-4030 MFP Service Manual page 81

5. Change the setting value using the cursor right/left keys or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
Center line of printing
(within ± 2.0 mm)
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following
adjustments in maintenance mode.
U034 -------- U067 -------- U072
(P.1-3-30)
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Correct image
(P.1-3-35)
1-3-26
Output Output
example 1 example 2
2NM/2NX/2NY/2NZ/2P0/2P6