29
CESSNA 400 TRANSPONDER
PILOT'S OPERATING HANDBOOK
AND ALTITUDE ENCODER (BLIND)
SUPPLEMENT
2
3
4
5
6
7
8
9
_\
./
•
-
1.
FUNCTION SELECTOR SWITCH - Controls application of power and selects
transponder operating mode as follows:
OFF
Turns set off.
SBY
Turns set on for equipment warm-up or standby power.
ON
Turns set on and enables transponder to transmit Mode A (aircraft
identification) reply pulses.
ALT
Turns set on and enables transponder to transmit either Mode A (aircraft
identification) reply pulses or Mode C (altitude reporting) pulses
selected automatically by the interrogating signal.
Figure
1.
Cessna 400 Transponder and Altitude Encoder (Blind)
(Sheet 1 of 2)
21 August 1981
2