Special Function Mode - Hisense WFU7012 Service Manual

8. TEST MODE
away, tumble the drum of washer at a speed of 93rpm for 10 seconds in anti-
clockwise direction, and then spin at an accelerated speed of 60 rpm/s. The spin
speed is the maximum speed of rotation, and the whole process consumes 115
seconds in total. (forced spin). After the said operations are completed, the
program will enter in C5;
8.1.7 The display window displays C5. Wait for 10 seconds. After the said
operations are completed, the program will enter in "Ready mode". In this way,
the self-inspection of washer is completed.

8.2 SPECIAL FUNCTION MODE

Press the "ON/OFF" button to start up the machine, select the "Spin" program,
press the "Function" button twice first, then the "Select" button and the "Function"
button within 5 seconds, and enter in the "Special function mode" afterwards.
CAUTION：After the inspection is finished, please turn off the special function
mode (Test mode、 Cycle mode), otherwise, it may lead to mal-operation of users
and further affect the normal usage of washing machine.
8.2.1 The display window displays Hisense version No.;
8.2.2 Press the "Function" button to select parameters, and modify the
parameters by pressing the "speed/Temp." button. (The parameter adjustment
screen will circularly display: equilibrium value 1-equilibrium value 2-equilibrium
value 3-equilibrium value 4-test function-circulation function-run cycle). Press
the "Start/Pause" button to save and exit ;
8.2.3 The display window displays "tE:xx/Cy:xx". "tE" represents "Test mode",
and "Cy"represents "Cycle mode". xx＝on/oF, meaning turn on/off;
26