Change Programme Or Optional Function During Operation; Programme End; Opening/Closing Door; Child Lock - Hisense WFMB6010EM User's Operation Manual

If the door lock indicator doesn't flash, it indicates that current temperature is over
50°C or you have passed the time for reloading in the process, namely no clothes
allowed to load into the machine.

8.6 Change programme or optional function during operation

Turn the programme selector knob on position "OFF" for 3 seconds to turn off the machine;
Restart the machine and select new programme and options. If needed, select spin speed.
Re-press "Start/Pause" button to start new programme. Don't add detergent any more.

8.7 Programme end

After the program ends and"END" is displayed, the door lock will be unlocked
and the knob will be turned to OFF to power off; if there is no button or knob
operation within 2 minutes, the program will automatically shut down;
Turn the programme selector knob on position "OFF" for 3 seconds to turn off the machine;
Close the tap;
Open the door and take the washed clothes out;
Slightly open the door to remove moisture in the tube.

8.8 Opening/closing door

After the procedure ends,the screen will show "End" and the door lock indicator
light goes out. At this time, the door can be opened.
If the door needs to be opened, press "Start/Pause" button, and if the door lock indicator light
flashes, it shows that the unlocking condition is met; in 2 minutes, the door lock indicators goes
out, and at this time, the door can be opened; if the door lock indicators does not flashes,
it shows that the unlocking condition is not met; under such situation, if the door needs
to be opened, turn the programme selector knob on position "OFF" for 3 seconds to
turn off the machine and restart the washing machine; select "Spin" procedure, and
set the spin speed as " 0 " . After the procedure operation ends, door lock indicators
goes out, and at this time, the door can be opened.
Never open the door forcibly while the machine is running,otherwise you can damage
the door lock.
To open the door, hold the door handle and pull the door. Close the door by pressing it
without excessive force until it clicks shut.

8.9 Child lock

Child lock
To strengthen the safety of children, the machine is equipped with "Child Lock" function.
When the programme starts, press "Spin + Options" button for 2 seconds,
the "child lock " indicator light is on then Child Lock is set up; When the Child Lock
is set, all function buttons except "Off" will be shielded.
After the program ends, Child lock function will release automatically. Any error alarm will
release the Child Lock function. Turn off and on the machine manually will reset the machine.;
When power is shut down, child lock is released.
22