Additional Functions - Hisense WFU7012 Service Manual

6. OPERATION
cause damage to the appliance.
♦ If you wish to open the door due to an emergency you must press the Start /
Pause button. It is important to check the level of the water inside the drum, and
the water temperature, before trying to open the door.
♦ If the door will not open after 2 – 3 minutes you can select the spin program
to drain the water from the drum. Lock off the appliance and open the door.
♦ Safety Notice： If the program is interrupted during the wash the temperature
of the items inside, and the drum, may be very high.To avoid any scalding, or
burns, care must be taken before removing any items from the drum.
Adding Clothes After the Program Has Started
♦ If you need to add other items of clothing after the program has started you
must check the level of the water inside the drum.If it safe to open the door press
the Start / Pause button.
♦ The remaining program time on the display will flash.The door lock indicator
will go out and the door can be opened after 2 – 3 minutes.
♦ If the door lock does not stop flashing this indicates that the temperature inside
the drum is above 50˚C, or it is too late in the program to add further items of
clothing.

6.4 ADDITIONAL FUNCTIONS

To change, or add. Any of the functions press the respective button and the
display will flash. Press the button again until the chosen option flashes and
then press select.
18