Master Codes - CODELOCKS CL2000 Programming And Operating Instructions

Suspend all User Codes - Program 04
#Master Code 04 • ••
Result: All User Codes suspended (• when all users enter code)
Restore all User Codes - Program 05
#Master Code 05 • ••
Result: All User Codes restored (• when all users enter code)
Change Unlock Time - Program 06
#Master Code 06 enter open time (range 2 - 9 secs) • •
Result: After code entry the lock will unlock for the set time (Factory
pre-set time is 4 seconds)

Master Codes

One Time User Code - Program 07
#Master Code 07 One time code ID (eg 81) One time Code (eg • •
4321) ••
Result: Code 4321 in position 81 will work once and then be
removed from memory
Note: ID Positions 81 to 90 are reserved for this program
function, allowing up to 10 One-Time User Codes to be entered.
SET CODE FREE MODE - PROGRAM 08
#Master Code 08 • ••
Result: Lock will be continuously unlocked
CANCEL CODE FREE MODE - PROGRAM 09
#Master Code 09 • ••
Result: Lock will revert to normal operation
CHANGE MASTER CODE - PROGRAM 10 *
#Master Code 10 enter length of Master Code followed by new • •
Master Code (eg 6, 123456) confirm length of Master Code •
followed by new Master Code (eg 6, 123456)
Result: Master Code now changed to
Note: If the length of the Master Code is changed then all
previous User Codes will be deleted
Codelocks UK Headquarters
Tel: +44 (0) 1635 239645
Fax: +44 (0) 1635 239644
sales@codelocks.com
www.codelocks.com
Helpline, service & spares
Freephone: 0800 393 405
POI-CL2/4/5000-v1:0316
•
••
•
••
# 123456
Codelocks Inc US
Tel: +1 714 979 2900
Fax: +44 (0) 1635 239644
sales@codelocks.us
www.codelocks.com
Helpline, service & spares
Toll free: 1.877.codelock
Page 6
Find more online at www.codelockssupport.com
Sub-Master Codes
Cancel Emergency Open Mode - Program 11
#Master Code 11 • ••
Result: The emergency unlocked condition via REM 2 will be
cancelled and the lock will revert to normal operation
Delete all User Codes - Program 12
#Master Code 12 12 • • •• (7 secs)
Result: All User Codes will be cleared from the memory
Add/Change Sub-Master Code - Program 13
#Master Code 13 Sub-Master Code (eg 2468) • •
Result: A Sub-Master Code # 2468 has been entered
Delete Sub-Master Code - Program 14
#Master Code 14 14 • • ••
Result: Sub-Master Code has been deleted
Locker/Unlocked Status - Program 15
1. Master Code 15 1 # • • •• = Locked, No LED flashing (this is the
default setting)
2. Master Code 15 2 # • • •• = Locked-Red LED flashing
3. Master Code 15 3 # • • •• = Unlocked-Blue LED flashing
Result: If activated LED's will flash continuously every 5 seconds
Note: LED's will not indicate unlocked mode by key
Codelocks (Australia) PTY LTD
Tel: +61 2 9882 1009
Fax: +61 2 9882 6030
sales@codelocks.com.au
www.codelocks.com.au
Helpline, service & spares
Toll free: 1800 052 131
••
•
•