Software Installation; Video Vbox Lite Registration - Racelogic VBOX LITE Hardware & Software Manual

VIDEO VBOX LITE MANUAL
Storage Media & AV Cameras
The Video VBOX LITE stores logged data onto an SD card. The SD cards available from Racelogic are already optimised
for use on the Video VBOX LITE and as such do not need formatting before use.
Should the SD Card need formatting due to card errors it can be done through Windows, as the Video VBOX LITE
supports the following format type:

FAT32
Racelogic strongly recommends the following media card brands:
SanDisk Kingston

Software Installation

The Video VBOX LITE setup software must be installed onto the hard drive of a computer; it cannot be run from the
installation CD.
NB: The Video VBOX LITE setup software requires Microsoft .NET Framework 3.5 Service Pack 1 or higher to run. The
installation CD contains the required .NET installation package.
NB: In order to play back the AVI files recorded by the Video VBOX LITE, the XVid Codec pack must also be installed.
The installation CD contains the required installation package.
To install the software insert the CD into the CD drive of your computer. The default installation language is English.
Press 'OK' to continue, then follow the on-screen instructions to complete the installation.
The Video VBOX LITE setup software is not limited to one user or computer and can be installed on multiple
workstations if so desired.

Video VBOX LITE Registration

So that Racelogic can continue to provide you with notification of the latest software releases, firmware upgrades and
to offer technical support, please register your Video VBOX LITE.
Please register your unit here: www.videovbox.co.uk/register
Or fill out the supplied registration form and return it to Racelogic.
Page | 11 22 December 2009