P4 Base Assembly; Lid Opener; Pressure Arm Assembly; Take-Up Arm - Hitachi DV-RV8500E/UK Service Manual

Disassembly and Reassembly > Deck Mechanism Disassembly
(15) P4 base assembly (Fig. A-5-1)
1) Release portion (A) of the P4 base assembly
from the boss of chassis.
2) Turn the P4 base assembly in the direction
of the arrow to release its engagement with
chassis.
(16) Lid opener (Fig. A-5-2)
1) Release portion (B) of the lid opener from
the boss of chassis.
2) Turn the lid opener in the direction of the
arrow to release its engagement with
chassis.
(17) Pressure arm assembly (Fig. A-5-3)
1) Lift the pressure arm assembly.
P4 Base Ass'y
(Fig.A-5-1)
Fig. A-5 P4 Base Ass'y, Lid Opener, Pressure Arm Ass'y, Take-up Arm
Note:
A spring is attached between the pressure arm
assembly and chassis: Take care not to lose it.
When reinstalling the pressure arm assembly,
make sure that you insert the boss at portion
(C) of pressure arm assembly into the slit in
cam gear at the back of chassis.
(18) Take-up arm (Fig. A-5-4)
1) Lift the take-up arm to release it from hook
(H9) of chassis.
Note:
When reinstalling the take-up arm, make sure
that you insert the boss at portion (D) of take-
up arm into the slit in cam gear at the back of
chassis.

Lid Opener

(Fig.A-5-2)
(B)
Pressure Arm Ass'y
(Fig.A-5-3)
(C)
(A)
4 - 13
(H9)
(D)

Take-up Arm

(Fig.A-5-4)
Chassis
BOSS (Pressure Arm Ass'y)
Cam Gear
BOSS (Take-up Arm)