Timer P.c.b; Vcr P.c.b - Hitachi DV-RV8500E/UK Service Manual

Disassembly and Reassembly > Cabinet Disassembly

(6) TIMER P.C.B

1) Remove the front holder.
2) Unplug the direct connectors from the VCR P.C.B.
3) Unplug the connector.
Information
Release the four stoppers of front holder: The TIMER P.C.B can be detached without removing the
deck mechanism.
3) Connector

(7) VCR P.C.B

1) Disconnect the two FFCs.
2) Remove four screws [C] from the rear panel.
3) Remove four screws [F] on the P.C.B.
4) Release the stopper.
5) Lift the entire VCR P.C.B, and then remove it in the direction of the arrow.
Caution when reinstalling VCR P.C.B:
Position the VCR P.C.B according to the positioning boss.
3) Screw [F]
1) FFC Connector
3) Screw [F]
1) Front Holder
Stopper
2) Direct Connector
Fig. 4-2-8 TIMER P.C.B
3) Screw [F]
5)
4) Stopper Positioning boss
Fig. 4-2-9 VCR P.C.B
TIMER P.C.B
*FFC: Flexible flat cable
2) Screw [C]
3) Screw [F]
[C] M3X8 [Black] [F] M3X6.5 [Gold]
VCR P.C.B
4 - 5
2) Screw [C]